Alto MIXPACK Express Sound System

Ultra-Portable Clean Power With Effects and EQ

The 350 Watt MIXPACK Express is one of three PA systems in the MIXPACK line, along with the 600 Watt MIXPACK and 1000 Watt MIXPACK Pro. Being the lightest and most portable of all MIXPACK PAs has its advantages. There simply isn't an easier, more affordable way to get this much clean power, mixing and Alesis DSP effects in one place. It takes only a few minutes from the time you bring MIXPACK Express into the venue, to the time the gig powers on, and power on it will. 

MIXPACK Express comes complete with two 10" speakers and 350 watts of continuous power. All the right connections are present including balanced XLR, balanced/unbalanced TRS and unbalanced RCA so no matter what you need to connect, you're all set. MIXPACK Express also includes two speaker cables in the package so you can get set up in no time. The speakers attach and detach to the amp/mixer module using firm, rugged latches and the entire kit can be carried in one hand thanks to a convenient, molded handle on top.

The built-in mixer on MIXPACK Express has five input channels with 16 Alesis DSP presets with 24-bit effects for Hall, Room, Vocal, Plate, Stereo Delay, Reverb + Delay and Reverb + Chorus combinations. Fine tune the performance with the integrated 7-band graphic EQ and monitor all of it with the built-in LED and Monitor Out jack.

If you need a solid PA system that is loaded with features and easy to transport, grab a MIXPACK Express. If you need a little more power, check out the MIXPACK and MIXPACK Pro, also from Alto Professional.

TECH INFORMATION
Mixer Section 
Microphone/Line Input: Electronically balanced, discrele input configuration
Frequency Response: 10 Hz to 55 kHz, +/-3 dBu
Microphone Input Impedance: 3.9 kΩ
Line Input Impedance: 10kΩ
Microphone Input S/N ratio:  ＞94 dBu
Microphone Inputs:  Balanced XLR connectors 
Line Inputs: Balanced / Unbalanced, 1/4' (6.3 mm) TRS jack connectors
Tape Inputs: Unbalanced RCA jack
Inputs Distortion (THD & N): 0.04% at 0 dBu, 1 kHz
Channel EQ High shelving: +/-15 dB @ 12 kHz  Low shelving  +/-15 dB @ 80 Hz                                        
Aux Send: 1 with paths for DSP internal section, external DSP section and Monitor Out
DSP Section: 24-bit Hall, Room, Vocal, Plate, Stereo Delay, Reverb + Delay and Reverb + Chorus combinations
Master Section: Master Level knob, 4 LEDs level meter, 7-band graphic output EQ, and DSP Return level 
Output Master EQ: 7-band, +/-5 dB @ 63Hz, 160 Hz, 400 Hz, 1 kHz, 2.5 kHz, 6.3 kHz, 16 kHz
Monitor Section: Master Level knob, 4 LEDs level meter, and 1/4" (6.3 mm) Monitor Out jack 

Speaker Section 
System Type 2-way coax vented box
Frequency Response 65 Hz - 20 kHz at -10 dB
Spherical horn Coverage 70° H × 70° V
Continuous Power 150 Watts AES Standard
Peak Power 300 Watts Peak
Protection Electronic circuit on driver
Speaker Specification 10" (254 mm) Low Frequency Driver /  2" (50.8 mm) Voice Coil, 1" (25.4 mm) Neodymium High
Input Connectors 1/4" (6.3 mm) mono (TS) jack on each cabinet

Amplifier Section 
Output Power 350 Watts (EIAJ)  
Impedance 4Ω
Protections Overload / Short Circuit / Soft Clip Limiter / Thermal Protection Fan Cooling

Standard Package 
Two speaker cables 
Power cord 
One microphone cable
Stands: F-8 or F-3 not included